Foliencutter
Geräteeinstellungen in Inkcut
- General
- Driver: ANAgraph AE-70e
- Device
- Settings
- Speed: 2 in/s
- Force: 40 g
- Output
- Orientation: Swap X/Y
- Settings
- Connection
- Type: Serial Port
Port: <richtig auswählen>
- Baudrate: 38400
- Bytesize: 8
- Parity: None
- Stopbits: 1
- Flow Control: -
- Protocol
- Language: HPGL
- Filters
- Overcut
- Overcut: 0,7mm
- Blade Offset
- Blade Offset: 0,36mm
- Cutoff angle: 5,00
- Overcut
Fun facts for cutting
* Must mirror print since the heat transfers are flipped over